OUTLINE CODING Question
Forum Sponsor
Top Posters
Julian Pegg
1 posts
Peter Nagy
2 posts
Raymund de Laza
17 posts
Syed_Asad
0 posts
Tony Greyvenstein
0 posts
Ahmed Al-Jubouri
13 posts
Umar Alvi
3 posts
Sibusiso Mahlalela
0 posts
Michael Samanyayi
3 posts
Simon Gumede
0 posts
Pinan T. and all others,
I confirm Paul Harriss post: it is definetely NOT possible to hide the 1st part of the outline code or of the group name; you cannot display: for instance if you group tasks on priority level, you cannot hide "priority:"
Alexandre
Nothing Works
Go Back to MSP 2003
2007 is crap
several bugs
cant use it with P6 to save the project in
who want 3D bars
F**K OFF
This is an oldish thread, I was wondering if there have been any developments on this issue? Service Pack perhaps (he says hopefully)?
Ive just been "upgraded" from 2003 to 2007 but after two days of trying to make it work Im now thinking about going back. Previously my hierarchical outline coding worked beautifully, now code Values are displayed instead of Descriptions, and the groupings dont work at all.
Ive replicated my hierarchical structure with individual codes which has sorted out the grouping issue, but it makes little difference because the descriptions still cant be seen!
Next step is to make the "Value" the "Description".
Long time Primavera user now suffering with Project. Ah, the good old days....
Yes
You Cant In MSP 2007
But Yes Sure In MSP 2003
and several other bugs in 2007
Hemant
My understanding is you can not.
Paul E Harris
Eastwood Harris Pty Ltd, Melbourne, Australia
Planning and Scheduling Training Manual & Book Publishers, Consulting and Training
www.eh.com.au
Sorry Pinan
But since I havent got 2007 I cant check.
Hopefully someone else out there can help who has 2007
Good luck
Colin
thanks, but im using msp 07 and outline code name appears to the left of the grouped outline with a separator :, values appears and not description.. or am i missing an option tick here?
thanx but what i mean is to hide that part.. it keeps on showing like that, say i rename the O code 1 as PHASE, then values include ENGINEERING,RCC WORKS, etc. then after grouping, it will show PHASE:ENGINEERING, PHASE:RCC WORKS.. what i want is to hide "PHASE:".. and i notice also that it will be in alphabetical order sequence, how can i patterned it as defined, say ENGINEERING, then RCC WORKS, then MEP Works, etc.
Hi Pinan
Tools/customise/fields
select custom outline codes
select outline code 1
Click Rename
Enter name of your choice
Regards
Colin
(let me know if this is helpful)
Sorry Pinan
I mis-understood and I typed without checking.
I should of also clarified that I am using MSP 2003.
Testing the situation, when I use the outline code - this does not give the name at the start (it only does that if I use Text1)
Try below -
Tools / customise / fields
Select ouline code 1
Click edit lookup table
Then if I type 1 etc in the outline code and to the right the desciption :-
1 Engineering
2 RCC Works
3 MEP works
Does this give what you want
An alternative is to name the value "1) Engineering" etc
Colin