Creating Target plan
Forum Sponsor
Top Posters
Julian Pegg
1 posts
Peter Nagy
2 posts
Raymund de Laza
17 posts
Syed_Asad
0 posts
Tony Greyvenstein
0 posts
Ahmed Al-Jubouri
13 posts
Umar Alvi
3 posts
Sibusiso Mahlalela
0 posts
Michael Samanyayi
3 posts
Simon Gumede
0 posts
Ived run a check now on the Project Overview and its ok
and i check also format bar/modify then i didnt noticed
that my start point is not in Target early start.
Thanks for your help.
Regards,
wilfred
I cant get it. Target bar always parallel to the currect bar except they are placed in same position. Please check the following: -
- Have target been assigned in Project overview
- What option been selected in bar format
Hi Guys,
In relation to Pelitas question, Ived done copying the project and make it as a target. But when i tried to show the target bar it appears to be not parallel with the current and it shows a long bar. Let say the project starts Jan 2004 and my activity starts May 2004 and end june the target bar shows Jan - June.
Need Help
Thanks,
wilfred
Pelita,
Your method is to assign an Existing project as tartget and/or update the assigned target project by current open project. It is not for creating a project for target from current.
Use Moises’s method, you now have a copy. Then you part is the OK for assign. Or by File - Open - select the current project - click Overview button at bottom left, goto to page Targets, select a project for target assignment.
Hello Kabayan,
You can also this procedure. Go to the ff Menu
TOOLS>>>>PROJECT UTILITIES >>> COPY ( read in the manual how to copy ...)be sure that copy file and orig file on same folder, then you can use this as your Target.
Regards,