Undo command is only available in P3e or P5. If you havent save, schedule, or press F5 to save your changes you can undo it by pressing Ctrl "Z" up to the last changes.
Member for
22 years 9 months
Member for22 years9 months
Submitted by Alexandre Faul… on Thu, 2007-05-10 15:59
Member for
20 yearsRE: undo command
Ifeanyi Olike;
P3e an P5 are not the same and there is no P3e ver 5.
The correct name is Primavera 5.0 (official name informed by Primavera Systems) an P5 is an abbreviation for Primavera 5.0.
P3e is an abbreviation for Primavera Project Planner for the Enterprise and its last varsion was 4.1. There is no P3e any more.
Regards.
Member for
19 yearsRE: undo command
P3e/P3ec came first as ver 4/4.1 then P3e ver5. All of them are the same but some country they call it differenly and not by version.
Member for
18 years 9 monthsRE: undo command
Rodel,
I thought P3e and P5 are the same. Or are they different?
Member for
19 yearsRE: undo command
Yap! I been using this since and now upgraded to P5 and its working fine.
Member for
22 years 9 monthsRE: undo command
Rodel,
is undo REALLY available since P3e? I had in mind that it had come only with P5
Alexandre
Member for
19 yearsRE: undo command
Undo command is only available in P3e or P5. If you havent save, schedule, or press F5 to save your changes you can undo it by pressing Ctrl "Z" up to the last changes.
Member for
22 years 9 monthsRE: undo command
Hi,
there is NO undo command in P3!
Alexandre