First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 13:04
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 13:03
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 13:00
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 12:58
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 12:58
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 12:58
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 month
Member for9 years1 month
Submitted by Sanjip Chaudhary on Wed, 2023-03-15 12:57
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
20 years 9 months
Member for20 years9 months
Submitted by Shanmugam Than… on Sun, 2010-12-26 10:20
Then Ajith can you send me the file on my email highlighting these activity and we can discuss to solve the problem. i have solved a lot of problem before in the same way .
Thanks. Yes cost is loaded to BL and BAC is showing the value of same of Budgeted Total Cost. This is happening to less than 10 activities of 5000 activities. Other activities are fine. I have tried to copy the activities which show earned value, however When it copied that new activities earned value is becoming zero.
Member for
14 years 11 months
Member for14 years11 months
Submitted by losin_my_religion on Sat, 2010-12-25 09:05
The Expenses is not taken in consideration while calculating the earned value. It should be in the cost load for each resource or to create a seperate resource with zero unit value and cost value.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
9 years 1 monthHiFirst and Foremost thing,
Hi
First and Foremost thing, EV is calculated based on Baseline Budgeted Cost. It is very important to see the distribution of this budgeted cost across your whole activity duration. The distribution is controlled by Resource-Curve. By default, resource curve assigned for any distribution is "Linear". In such Linear case, EV will be calculated normally. But sometimes, If different Curve has been defined and assigned say, Total cost loaded at the end part for two time periods of the activity only then EV will keep on showing Zero values for say upto 80% activity progress, and after 80% progress only, EV will start be appearing with some values.
Conclusion is, check the resource curve assigned for that acitivity.
Member for
20 years 9 monthsOK, Thanks Ahmed.
OK, Thanks Ahmed.
Member for
17 years 6 monthsThen Ajith can you send me
Then Ajith can you send me the file on my email highlighting these activity and we can discuss to solve the problem. i have solved a lot of problem before in the same way .
elassal_2112@yahoo.co.uk
Member for
16 years 4 monthsHai You Can Also Check the
Hai
You Can Also Check the Following
1.After Updating the Expense % whether the actual cost , Remaining Cost for the activity in Progress is Showing correct
2.Check Expense % = Activity%
3.If not Type the Actual Cost & Remaining Cost
4.Check whether Auto Compute Actual is Tick
Regards
Anbin
Member for
16 years 4 monthsHai You Can Also Check the
Hai
You Can Also Check the Following
After Updating the Expense % whether the actual cost , Remaining Cost for the activity in Progress is Showing correct
If not Type the Actual Cost & Remaining Cost
Check whether Auto Compute Actual is Tick
Regards
Anbin
Member for
20 years 9 monthsHi Amit, Thanks. Yes cost is
Hi Amit,
Thanks. Yes cost is loaded to BL and BAC is showing the value of same of Budgeted Total Cost. This is happening to less than 10 activities of 5000 activities. Other activities are fine. I have tried to copy the activities which show earned value, however When it copied that new activities earned value is becoming zero.
Member for
14 years 11 monthsHi Ajith,The activities for
Hi Ajith,
The activities for which the EV is coming zero, do they have cost loaded in the baseline? The calculation for EV are
EV= perf%complete X BAC (Budget at Completion), where BAC= Cost in Project Baseline
So if the BAC=0 then your EV will always be zero.
Regards
Amit
Member for
20 years 9 monthsHi Anbin, As you said I have
Hi Anbin,
As you said I have update the progress Expenses % complete but still eaned value zero.
Member for
20 years 9 monthsHi Pinan, yes it is updated
Hi Pinan, yes it is updated in the duration and it is by default as well
Member for
20 years 9 monthsHi Pinan, yes it is updated
Hi Pinan, yes it is updated in the duration and it is by default as well
Member for
20 years 9 monthsHi Ahmed, I 've tried as said
Hi Ahmed,
I 've tried as said but still same.
Member for
16 years 4 monthsHai You can Check the
Hai
You can Check the Following
1.Insert Expense % Complete Column and check whether it has percentage same as activity% or Duration%.
2.If your Cost is loaded in Expenses Item then you need to update manually Expense % Complete.
3. Expense % is not linked with Activity% or Duration %.
As your Cost is Loaded in Expense item are you able get Remaining Late Cost to Draw Late Curve. If so can you Say me the Steps
i am able get Remaining Late cost only for Resources item
Regards
Anbin
Member for
17 years 6 monthsThe Expenses is not taken in
The Expenses is not taken in consideration while calculating the earned value. It should be in the cost load for each resource or to create a seperate resource with zero unit value and cost value.
Member for
18 years 3 monthshi ajithwhat is your percent
hi ajith
what is your percent complete type assigned in the project?
check it from project details defaults tab of your project
make sure it is duration