I am facing the same issue, except I am on the contractor's side. Did you find a resolution to your problem of not being able to open P3 file after file restore? Owner indicates they are able to restore, but cannot find the file to open after restore is completed. Any help would be appreciated.
Member for
18 years 9 months
Member for18 years9 months
Submitted by Dieter Wambach on Fri, 2009-10-02 10:49
is because it is still in a zip folder (notice the “\ZIP\”?). You have to un-pack it first.
Even though your operating system allows programs to read the directory of a zip folder, it doesn’t mean that P3 and PFXW are able to open and read the files while they are in compressed mode. Un-zip them and try again. Good luck!
Member for
16 years 1 month
Member for16 years1 month
Submitted by Jared Williams on Thu, 2009-10-01 10:22
I did make one on the route directory as well, also got your pm and sent that along for some assistance.
Each part of the path is 8 or less characters, and total is less than 64 characters so it should be fine. I have other files in that branch that open up fine.
I did trick the system to try to open them, even though it doesnt show up on the file open menu. What I did is edit the p3.ini file to direct latest files to the locations, but it says "can not open project"
I might just need to visit the contractor, make a copy on his computer, run the corrupt file tool, then zip it up.
Member for
18 years 9 months
Member for18 years9 months
Submitted by Dieter Wambach on Thu, 2009-10-01 08:43
Thank you for the ideas, I did get the search on here working and looked around more and still nothing.
If / when I get this resolved I will be sure to post the fix for others to see. My colleagues have had no luck either and the contractor submitting the schedule seems to be fine opening the schedule and checked he is running P3.1 SP3, has access for read/write to everyone, and checked off the box to remove access list during backup.
Also as I said he did also send the files clean just zipped up. The corrupt file tool from Primavera can see the project but says it can not open 90% of the individual files.
Sometimes I wonder if having a PC with an older version of windows would help for things like this... bad enough being held to a 16 bit OS with 3gb ram, cant imagine running an 8 bit one again lol.
Member for
18 years 9 months
Member for18 years9 months
Submitted by Dieter Wambach on Thu, 2009-10-01 01:26
Sorry if I expressed myself wrong. I meant: just rename this file, if it exists. Dont take a new one.
If this doesnt work its a good idea to wait for your colleague and try with a different pc. Or, if there is a chance, ask for a new file; yours might be corrupt.
Good luck!
Dieter
Member for
16 years 1 month
Member for16 years1 month
Submitted by Jared Williams on Wed, 2009-09-30 14:09
Thanks for the input, I did try taking a "Users50.p3" file from another job folder and edit the text for this project.
However if you backup a project and select to remove access list it basically just skips that file and when you open it the first time P3 will make a new one.
Regardless I think it must be something a bit more sever, I am waiting on one of my colleagues to get back to me and see if it works on his machine.
Member for
18 years 9 months
Member for18 years9 months
Submitted by Dieter Wambach on Wed, 2009-09-30 13:59
I narrowed it down to the ****DIR.P3 file, as I could make a mock project and it would show up in the open list when I replaced all the other files but this one. Of course without the matching DIR file its useless but wanted to see where the error in opening is coming from.
Is there anyway to get into these files to see whats going on, or any ideas on how to request he backs it up differently so I can read the file?
Member for
16 years 1 month
Member for16 years1 month
Submitted by Jared Williams on Wed, 2009-09-30 09:46
Thanks, I dont think it had a target as it is the baseline schedule. Typically you can see the project on the list and remove or change targets before opening.
My issue is that the project is invisible on the open project list withing P3 but if you use windows explorer you can see the project files after the restore.
Member for
14 years 10 monthsRestore&Opening File Issues I
Restore&Opening File Issues
I am facing the same issue, except I am on the contractor's side. Did you find a resolution to your problem of not being able to open P3 file after file restore? Owner indicates they are able to restore, but cannot find the file to open after restore is completed. Any help would be appreciated.
Member for
18 years 9 monthsRE: P3 Project Restore Issues
Ronald
With my pc I wasnt able to open the P3 files after unzip. PFXW didnt work neither. It wasnt able to locate the project.
With intention I displayed the contents of the pbackup-file. I hoped that you would read it and have an idea. You are much more experienced with P3.
Regards
Dieter
Member for
22 years 10 monthsRE: P3 Project Restore Issues
The reason that PFXW cannot open file
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1DIR.P3
is because it is still in a zip folder (notice the “\ZIP\”?). You have to un-pack it first.
Even though your operating system allows programs to read the directory of a zip folder, it doesn’t mean that P3 and PFXW are able to open and read the files while they are in compressed mode. Un-zip them and try again. Good luck!
Member for
16 years 1 monthRE: P3 Project Restore Issues
Thank you, I think I will need to try and talk the contractor through running the PFWX.exe tool on his file before zipping it for me.
Member for
18 years 9 monthsRE: P3 Project Restore Issues
Jared
I tried but without success. In my opinion the file is corrupt.
A little strange is the pbackup.050-file: DCR1DIR.P3 DCR1ACT.P3 DCR1REL.P3 DCR1RES.P3 DCR1LOG.P3 DCR1WBS.P3 DCR1ITM.P3 DCR1TIM.P3 DCR1AUD.P3 DCR1STW.P3 DCR1TTL.P3 DCR1ACC.P3 DCR1RLB.P3 DCR1STR.P3 DCR1DST.P3 DCR1HOL.P3 DCR1CAL.P3 DCR1LAY.P3 DCR1REP.P3 DCR1PLT.P3 DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1*.?? DCR1PPA.P3 ZZZZZZZZZZZZZ
Sorry, no success
Dieter
Member for
16 years 1 monthRE: P3 Project Restore Issues
I did make one on the route directory as well, also got your pm and sent that along for some assistance.
Each part of the path is 8 or less characters, and total is less than 64 characters so it should be fine. I have other files in that branch that open up fine.
I did trick the system to try to open them, even though it doesnt show up on the file open menu. What I did is edit the p3.ini file to direct latest files to the locations, but it says "can not open project"
I might just need to visit the contractor, make a copy on his computer, run the corrupt file tool, then zip it up.
Member for
18 years 9 monthsRE: P3 Project Restore Issues
Jared
I assume, the path-name is too long (16-bit software). Create a directory c:\p3win\dcr1 and move your files to there. Then try to open.
Regards
Dieter
Member for
16 years 1 monthRE: P3 Project Restore Issues
This is the file from trying to run the fix, where you can see whats going on.
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1DIR.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ACT.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REL.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1RES.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1LOG.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1HOL.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1TTL.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1RLB.P3
**********************************************************
Fixing file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.P3 to file
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.FIX
File C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.FIX has 3 records.
Your bad file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.P3 has been renamed to
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.BAD.
Your fixed file has been renamed to the original file name,
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ITM.P3.
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1TIM.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1AUD.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1AC2.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1ACC.P3
**********************************************************
Fixing file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.P3 to file
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.FIX
File C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.FIX has 1166 records.
Your bad file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.P3 has been renamed to
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.BAD.
Your fixed file has been renamed to the original file name,
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1REP.P3.
**********************************************************
Fixing file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.P3 to file
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.FIX
File C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.FIX has 565 records.
Your bad file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.P3 has been renamed to
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.BAD.
Your fixed file has been renamed to the original file name,
C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PLT.P3.
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1WBS.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1STR.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1LAY.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1STW.P3
Unable to find or open file C:\P3WIN\PROJECTS\DISTRICT\ZIP\DCR1PPA.P3
One or more problems detected during processing, see above for details.
Member for
16 years 1 monthRE: P3 Project Restore Issues
Thank you for the ideas, I did get the search on here working and looked around more and still nothing.
If / when I get this resolved I will be sure to post the fix for others to see. My colleagues have had no luck either and the contractor submitting the schedule seems to be fine opening the schedule and checked he is running P3.1 SP3, has access for read/write to everyone, and checked off the box to remove access list during backup.
Also as I said he did also send the files clean just zipped up. The corrupt file tool from Primavera can see the project but says it can not open 90% of the individual files.
Sometimes I wonder if having a PC with an older version of windows would help for things like this... bad enough being held to a 16 bit OS with 3gb ram, cant imagine running an 8 bit one again lol.
Member for
18 years 9 monthsRE: P3 Project Restore Issues
Jared
Sorry if I expressed myself wrong. I meant: just rename this file, if it exists. Dont take a new one.
If this doesnt work its a good idea to wait for your colleague and try with a different pc. Or, if there is a chance, ask for a new file; yours might be corrupt.
Good luck!
Dieter
Member for
16 years 1 monthRE: P3 Project Restore Issues
Thanks for the input, I did try taking a "Users50.p3" file from another job folder and edit the text for this project.
However if you backup a project and select to remove access list it basically just skips that file and when you open it the first time P3 will make a new one.
Regardless I think it must be something a bit more sever, I am waiting on one of my colleagues to get back to me and see if it works on his machine.
Member for
18 years 9 monthsRE: P3 Project Restore Issues
Jared
One more assumption: It might be due to the access rights.
As far as I remember, if there is a file "USERS50.P3" just modify the name and try again.
Good luck!
Dieter
Member for
16 years 1 monthRE: P3 Project Restore Issues
I narrowed it down to the ****DIR.P3 file, as I could make a mock project and it would show up in the open list when I replaced all the other files but this one. Of course without the matching DIR file its useless but wanted to see where the error in opening is coming from.
Is there anyway to get into these files to see whats going on, or any ideas on how to request he backs it up differently so I can read the file?
Member for
16 years 1 monthRE: P3 Project Restore Issues
Thanks, I dont think it had a target as it is the baseline schedule. Typically you can see the project on the list and remove or change targets before opening.
My issue is that the project is invisible on the open project list withing P3 but if you use windows explorer you can see the project files after the restore.
Member for
19 years 1 monthRE: P3 Project Restore Issues
im not sure of this, but try to include the target project (if any) in the back-up, and restore it as well
Member for
16 years 1 monthRE: P3 Project Restore Issues
To clarify, it doesnt have the ****AC2.p3 file and USERS50.p3 file, but fresh restores dont usually have them till you open it.