To create the drive that Bijaya Bajracharya is discussing you need to go to Explorer and use the command Tools, Map Network Drive….. and create a drive with a short path.
Paul E Harris
Eastwood Harris Pty Ltd, Melbourne, Australia
Planning and Scheduling Training Manual & Book Publishers & Consulting
It is likely that the folder where your project is located too many levels down in the folder structure. Eg.(g:/level1/level2/level3/your_project_folder). Actually it is not only levels of the structure but the length of the folder name. Solution- Create network drive name for your folder. Like the above path g:/level1/level2/level3/your_project_folder can be replaced by a shorter network drive of z:/
Member for
24 years 6 monthsRE: Using Filter Command on P3 ver 3.1
To create the drive that Bijaya Bajracharya is discussing you need to go to Explorer and use the command Tools, Map Network Drive….. and create a drive with a short path.
Paul E Harris
Eastwood Harris Pty Ltd, Melbourne, Australia
Planning and Scheduling Training Manual & Book Publishers & Consulting
www.eh.com.au
Member for
20 years 8 monthsRE: Using Filter Command on P3 ver 3.1
It is likely that the folder where your project is located too many levels down in the folder structure. Eg.(g:/level1/level2/level3/your_project_folder). Actually it is not only levels of the structure but the length of the folder name. Solution- Create network drive name for your folder. Like the above path g:/level1/level2/level3/your_project_folder can be replaced by a shorter network drive of z:/