Guild of Project Controls: Compendium | Roles | Assessment | Certifications | Membership

Tips on using this forum..

(1) Explain your problem, don't simply post "This isn't working". What were you doing when you faced the problem? What have you tried to resolve - did you look for a solution using "Search" ? Has it happened just once or several times?

(2) It's also good to get feedback when a solution is found, return to the original post to explain how it was resolved so that more people can also use the results.

Pumped Screed

2 replies [Last post]
Thu, 2006-04-06 10:38
Andrew Owenson
User offline. Last seen 16 years 17 weeks ago. Offline
Joined: 10 Nov 2005
Posts: 48
Groups: None
Guys

I need a rate for pumped screed 50mm and the areas are 640M2 and 2114M2

Any help would be appreciated - I checked the production rates and these looked like they were not pumped rates.


Andrew
Top

Replies

Fri, 2006-04-07 03:37
#1
Andrew Owenson
User offline. Last seen 16 years 17 weeks ago. Offline
Joined: 10 Nov 2005
Posts: 48
Groups: None
Steven

Many Thanks for the reply.

Andrew
Top
Fri, 2006-04-07 03:15
#2
Steven Oliver
User offline. Last seen 11 years 39 weeks ago. Offline
Joined: 8 Nov 2002
Posts: 313
Groups: None
Start from the delivery of the concrete pump. If the pump is rated at 1m3/hr, then as a starting point (640m2 * 0.05m) 32m3 will take 32 hours. Factor this with efficiencies etc
Top