Email : sheiksyedali.eta@g.mail.com MOBILE:+91 8015691782 (India)
OBJECTIVE
I sincerely wish to obtain a challenging career leading to professional and personal growth in an organization where the work demands high degree of skills
that extensively utilizes and enhances my knowledge and experience to successfully deploy projects in time with available resources.
EDUCATIONAL QUALIFICATION
Bachelor of Engineering in ELECTRICAL AND ELECTRONICS
DHAANISH AHMED College OF ENGG, Chennai.
Anna University,
Course Duration: 2006- 2010.
Class: First class.
PROFESSIONAL EXPERIENCE
Totally 3 years Experience in the field of Electrical Equipments Inspection and Erection in control room and substation in Oil & Gas, CONSTRUCTION exploration.
PRESENT EXPERIENCE
Detailed Experience:-
Organization: UNITED ENGINEERING PROJECTS LLC, Oman.
Client: OCCIDENTAL MUKHAIZNA LLC, OMAN
Contract: Electrical & Instrumentation Contract
Period: DEC 2011 to 07/10/2013
Position: GENERAL ELECTRICAL ENGINEER.
PROJECTS HANDLED:
Client: OCCIDENTAL OF OMAN, Mukhaizna Oil Field.
(A Subsidiary of Occidental Petroleum Corporation).
It’s an Onshore Oil & Gas Field with Central Oil Gathering/Processing & Satellite Facilities (CPFS), Gas Turbine Generator/Heat Recovery Steam Generator, Early Thermal Facility, Multiple Effect Mechanical Vapour Compressors Brine Concentrator Unit, Oil Production Wells, Steam Injection Wells.
Responsibilities involved:
⦁ To Maintain plant activities and Production activities ,to achieve production targets day to day activities
⦁ Should have good communication Skills.
⦁ Take permit to work system from Oxy supervisors and control the crew members in work site. Arranging the materials at right time
⦁ Cable jointing and Ring works in oil and gas fields. To give the supply to the wells .Doing Substation maintenance works
Substations, Central Processing Facilities which exports 1, 50, 000 BPD of Crude oil
Satellite -1 and Satellite-2 is collective station of oil from nearby Oil wells.
Multiple Effect Mechanical Vapor Compressor System, Exports 300000 BPD of Distillate water.
⦁ Oil Production Wells (RDPCP, ESP, BEAM PUMP WELLS), Steam Injection Wells, Water source/ disposal Wells, CVR wells.
⦁ Instrument installation in wells (PIT, TIT, and FT) and also had my experience with SAM panel, Variable Frequency and Speed drive.
⦁ Inspection of various Instrument installations, performing inspection/ witnessing of all kinds of process instruments related activities and as per approved quality control procedures.
⦁ Switch Rack installation and overhead line construction.
⦁ Fire alarm system design in sub-stations, light fixtures for plants and sub stations.
⦁ Installation of 33kv, 11kv, 6.6kv transformers and UPS system.
⦁ Installation of Instrument Wireless Gate way in wells for communication purpose.
Planning and Designing for all Electrical works. Involving in supervising of site activities and preparing erection, installation & testing of Hook up of well head works and in Gathering station works. Preparation of Construction Check Sheet, Preparation of As built drawings and Preparation of Project dossier, Verification of calibration certificates.
⦁ DUTIES &RESPONSIBILITIES COVERED IN MUKHAIZNA:
⦁ MPS - Main Production Station
⦁ MVC Mechanical vapour compressor
⦁ CPFS - Central Processing Facilities Station
⦁ GAPSAC - GAP Strong Acid Cation
⦁ HRSG - Heat Recovery Steam Generators
⦁ ETF - Early Thermal Facilities
⦁ SAT-1,2,4 - SATELLITE-1,2,4
⦁ OTSG - Once Through Steam Generator
⦁ RMS - Ring Main System
⦁ North & West Thermal 1,2,3,4
⦁ North & South Well
SAT-4 GATHERING STATION
Installation of 6.6kv Schneider panel. 33/6.6kv, 12.5MVA transformers, 6.6/0.433kv 1.6MVA transformers, 110V UPS, HV and LV cables, flood lighting poles around the substation, earthings etc… Installation of flare panel, fire and gas devices such as smoke detector, heat detector, manual call point and sounder and cabling works between them.
Well Heads:
1. Oil Production Wells (RDPCP, ESP, BEAM PUMP WELLS), Steam Injection Wells, Water source/ disposal Wells.
2. Planning and Designing for all Instrumentation works. Involving in supervising of site activities and preparing erection, installation & testing of Hook up of well head works and in Gathering station works. Preparation of PTW for the daily routine projects works. Acquainted with permit to work system including that adopted by OXY standards. Preparation of Construction Check Sheet, Preparation of As built drawings and Preparation of Project dossier, Verification of calibration certificates.
Ring Main Units (RMU):
Installation of RMU (11KV) with step down transformer for providing permanent power supply to the well heads.
⦁ Testing of All 6.6 KV HT Switchgear Panels.
⦁ 2500 / 2000 / 1600 / 1000 KVA Transformer Erection.
⦁ Segregated Phase Bus Duct & Non Segregated Phase Bus Duct Erection.
⦁ Supervising and executing all the electrical works as per Power Generation Authority Board Denmark and Non conventional Energy Dept. Bombay standards such as 33Kv, 11Kv unit substations, switching yards, HV&LV cables laying, Splicing, terminations and other underground distribution system, testing, Pre-commissioning and Commissioning
⦁ Transmission line preparation including pole erection, insulators and conductors installation, Sag maintain, line charging and testing with loads.
⦁ Earth fault finding, HV line shut down, grounding protections, Safety Precautions and line charging.
⦁ Indoor type control panels like as grid, Power factor, Synchronization and turbine controller installation, termination, pre-commissioning and Commissioning
⦁ Management Skills in working Environment to succeed tin team work.
⦁ Monitoring automation control unit without any interrupt.
⦁ Automation control system implementation and monitoring process
⦁ Field skill in Water Level Management (Pump station, Swimming pool, Ornamental Fountain)
⦁ Active and Passive Device testing and implementation
⦁ Preventive and corrective maintenance in all electrical Link Networks
⦁ Induction motor fault correcting and testing the Electrical Parameters (Ampere, voltage, Insulation, winding status etc...)
HES EXPOSURE
⦁ HES Induction Course from Occidental Mukhaizna LLC, Oman
⦁ H2S Awareness and Escape safety course.
⦁ Permit to Work Applicant from OXY.
⦁ Job Hazard Analysis from OXY
⦁ Development of HSE Plan for improvement of HSE Standards
⦁ Conducting HSE Audits at Scheduled sites and ensure compliance to safety standards
⦁ Follow up on proper close out of HSE Audits
⦁ Tracking Occupational Health Injuries and advise on possible reductions
⦁ Ensuring compliance to local statutory and client requirements
⦁ Ensuring Safety Communications, Emergency contacts are available at locations
⦁ Imparting awareness on HSE requirements and standards
⦁ Conducting various safety trainings to the workers
⦁ Fire/safety/Health hazard control
⦁ Conducting Safety Induction and Toolbox Talk.
⦁ Reporting of accidents, Prevention of fire & accidents
⦁ Risk assessment & safety precautions.
⦁ Accident/Incident reporting
⦁ Promoting positive Safety culture in the Organisation.
PREVIOUS EXPERINCE
Worked as PURCHASE / SITE Engineer in ETA ENGG. Pvt. Ltd, Chennai, TamilNadu, India. From JULY 2010 to AUGUST 2011. Involved in the PURCHASE /SITE of various process in construction.
PERSONNEL PROFILE:
Name : SHEIK SYEDALI. D
Fathers Name : S.N.T.DIWAN MOHIDEEN
Date of Birth : 12/09/1987
Nationality : Indian
Religion : MUSLIM
Gender : Male
Marital status : Single
Mother tongue : Tamil
Languages known : English, Malayalam.
Permanent Address : NO. 86, Alapillai Street,
Melapalayam,
Tirunelveli, Tamil Nadu-INDIA.
Pass port details
a) Pass Port No: H7251507
b) Date of Issue: 27/10/2009
c) Date of Expiry: 26/10/2019
d)Place of Issue: Madurai.
E-Mail : sheiksyedali.eta@g.mail.com
The information furnished above is true to best of my knowledge.
SHEIKSYEDALI .D